Front and Rear | Enhancement Bush Kit
| KIT146K | 1 | | $1090.00 |
Mounting, control/trailing armEnhancement Bush KitKit contains: - Front Control Arm Lower-Inner Front Bush Kit - Double Offset
- Front Control Arm Lower-Inner Rear Bush Kit
- Front Control Arm Lower-Shock Mount Bush Kit
- Front Control Arm Upper-Inner Bush Kit
- Rear Control Arm Lower-Inner Bush Kit
- Rear Toe Control Arm Inner Bush Kit
- Rear Toe Control Arm Outer Bush Kit
Vehicle Application Information: - Fitting time [min]: 600
- Fitting Position: Front and Rear
- Axle alignment required after fitting
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front and Rear | Enhancement Bush Kit
| KIT155K | 1 | | $1101.00 |
Mounting, control/trailing armEnhancement Bush Kitstandard replacement Kit contains: - Front Control Arm Lower-Inner Front Bush Kit - standard replacement
- Front Control Arm Lower-Inner Rear Bush Kit
- Front Control Arm Lower-Shock Mount Bush Kit
- Rear Control Arm Upper-Inner Bush Kit
- Rear Control Arm Lower-Inner Bush Kit
- Rear Control Arm Lower-Outer Bush Kit
- Rear Toe Control Arm Inner Bush Kit
- Rear Toe Control Arm Outer Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting time [min]: 600
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit
| TRC1096 | 1 | | $378.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade The SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - standard replacement
- kit does not include ball joints, please re-use OE ball joints
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit
| SPF2945K | 1 | | $244.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit - Double Offset
| SPF2947K | 1 | | $244.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: KIT146K (x1)
|
Front | Control Arm Lower Inner Front Bush Kit - Single Offset
| SPF2946K | 1 | | $244.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush Kit - Single OffsetUse this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- Steering Pull Correction Kit
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF3075K | 1 | | $144.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Part of kit: KIT146K (x1)
|
Front | Control Arm Lower Shock Mount Bush Kit
| SPF3076K | 1 | | $206.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Shock Mount Bush Kit- Fitting time [min]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: KIT146K (x1)
|
Front | Control Arm Upper Inner Bush Kit
| SPF3072K | 1 | | $220.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Front
- Part of kit: KIT146K (x1)
|
Front | Control Arm Upper Inner Bush Kit - Double Offset
| SPF3074K | 1 | | $256.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- camber adjustable
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit - Single Offset
| SPF3073K | 1 | | $243.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Single OffsetUse this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer’s specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver’s side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Front End Repair Kit
| KIT163K | 1 | | $633.00 |
Mounting, control/trailing armFront End Repair KitKit contains: - Front Control Arm Lower-Inner Front Bush Kit
- Front Control Arm Lower-Inner Rear Bush Kit
- Front Control Arm Lower-Shock Mount Bush Kit
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF3603-45K | 1 | | $86.65 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - to suit 45mm OD Steering Rack
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF3603K | 1 | | $83.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - to suit 48mm OD Steering Rack
Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Subframe to Chassis Mount Bush Kit
| SPF3497K | 1 | | $111.00 |
Bush, sub-frameSubframe to Chassis Mount Bush Kit- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4081L | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
165 Degree opposed
Length 70mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4081R | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
165 Degree opposed
Length 70mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045A | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 125 mm - Maximum Length 145 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF3077-26K | 1 | | $63.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF3077-28K | 1 | | $63.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Camber Adjustment Kit
| KIT094K | 1 | | $473.00 |
Mounting, control/trailing armCamber Adjustment KitKit contains: - Rear Control Arm Lower-Inner Bush Kit - Double Offset
- Rear Control Arm Upper-Inner Bush Kit - Double Offset
- Rear Toe Control Arm Outer Bush Kit - Double Offset
- Fitting Difficulty: difficult
- Fitting time [min]: 330
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit
| SPF2588K | 1 | | $120.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitVehicle Application Information: - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: KIT146K (x1)
|
Rear | Control Arm Lower Inner Bush Kit - Double Offset
| SPF2589K | 1 | | $168.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Lower Outer Bush Kit
| SPF2588K | 1 | | $120.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Outer Bush KitVehicle Application Information: - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: KIT146K (x1)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF2588K | 1 | | $120.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information: - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: KIT146K (x1)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF2589K | 1 | | $168.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4082L | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
90 Degree opposed
Length 117mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4082R | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
90 Degree opposed
Length 117mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2403-18K | 1 | | $70.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 14, 15, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2403-19K | 1 | | $71.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 14, 15, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF2590K | 1 | | $140.00 |
Mounting Kit, control/trailing arm mountingToe Control Arm Inner Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: KIT146K (x1)
|
Rear | Toe Control Arm Outer Bush Kit
| SPF2590K | 1 | | $140.00 |
Mounting Kit, control/trailing arm mountingToe Control Arm Outer Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: KIT146K (x1)
|
Rear | Toe Control Arm Outer Bush Kit - Double Offset
| SPF2591K | 1 | | $190.00 |
Mounting Kit, control/trailing arm mountingToe Control Arm Outer Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|