| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 |  | $39.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
| SPF1160K | 1 | | $61.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Front Bush KitCrush Tube 16 x 12 x 60 - Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard replacement | SPF1500K | 1 | | $84.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitStandard replacement - Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Alignment Correction | SPF1502K | 1 | | $82.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Anti Lift & Caster Increase | SPF1502XK | 1 | | $84.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitAnti Lift & Caster Increase - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction for Performance | SPF1502AK | 1 | | $82.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction for Performance Vehicle Application Information: - 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction | SPF1501K | 1 | | $82.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
Not EVO series | SPF1706K | 1 | | $54.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitNot EVO series - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Sway Bar Link Bush Kit
| SPF2092BK | 1 | | $24.00 |
Bush, shock absorberSway Bar Link Bush Kit- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1572-20K | 1 | | $24.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 16, 18, 19, 20, 22, 23 & 24mm Vehicle Application Information: - Fitting Position: Rear
- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1572-22K | 1 | | $24.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 16, 18, 19, 20, 22, 23 & 24mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1572-23K | 1 | | $24.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 16, 18, 19, 20, 22, 23 & 24mm Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner & Outer Bush Kit
| SPF1573K | 1 | | $182.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner & Outer Bush Kit- Axle alignment required after fitting
- Fitting Time [min.]: 240
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Panhard Rod Bush Kit
| SPF0427K | 2 | | $32.00 |
Bush, panhard rodPanhard Rod Bush Kit- Fitting Difficulty: difficult
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Position: Rear
- Fitting Time [min.]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Sway Bar Link
Standard Replacement | TRC4006 | 2 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint Link
60mm center to center - Fitting Difficulty: easy
- Fitting Time [min.]: 30
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
| SPF2092BK | 1 | | $24.00 |
Bush, shock absorberSway Bar Link Bush Kit- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | | $133.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1572-20K | 1 | | $24.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 16, 18, 19, 20, 22, 23 & 24mm Vehicle Application Information: - Fitting Position: Rear
- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Bar diameter 12, 13, 15, 16, 18, 19, 20, 22mm ava, 32mm wide bracket | SPF1826-18K | 1 | | $31.00 |
Sway Bar Bush KitSway Bar Mount Bush KitBar diameter 12,13,15,16,18,19,20,22mm ava,32mm wide bracket Vehicle Application Information: - Measure bar diameter, 32mm wide bracket
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Bar diameter 12, 13, 15, 16, 18, 19, 20, 22mm ava, 32mm wide bracket | SPF1826-19K | 1 | | $31.00 |
Sway Bar Bush KitSway Bar Mount Bush KitBar diameter 12,13,15,16,18,19,20,22mm ava,32mm wide bracket - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front Bush Kit
| SPF1574K | 1 | | $97.00 |
Control Arm-/Trailing Arm BushTrailing Arm Lower-Front Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Part of kit: (x)
|
