| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 |  | $50.59 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm - Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
| SPF1843K | 1 | | $104.62 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
PS & DS standard | SPF1280K | 1 | | $140.24 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitPS & DS standard Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
Alignment Correction for Performance | SPF1282AK | 1 | | $260.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitAlignment Correction for Performance Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Double Offset
Alignment Correction | SPF1282K | 1 | | $249.99 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 degree caster adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - PS increased DS decrease caster
- Performance Handling Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Single Offset
Alignment Correction | SPF1281K | 1 | | $205.82 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - PS increased DS standard caster
- Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Sway Bar Link
Cut To Length Link | TRC4004 | 2 |  | $42.32 |
Stabiliser Bar, chassisSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link
LHS - Standard Replacement | TRC4023L | 1 | | $36.95 |
Stabiliser Bar, chassisSway Bar LinkLHS - Standard Replacement 10mm Ball Joint Link
90 degree opposed
Length 105mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link
RHS - Standard Replacement | TRC4023R | 1 | | $36.95 |
Stabiliser Bar, chassisSway Bar LinkRHS - Standard Replacement 10mm Ball Joint Link
90 degree opposed
Length 105mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $190.88 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF0202-19K | 1 | | $38.36 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 21, 22, 23, 25.4, 26 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF0202-23K | 1 | | $38.36 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 21, 22, 23, 25.4, 26 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degree Camber | SPF4351-12K | 1 | | $50.59 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degree Camber Camber Bolt Kit 12mm - Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $190.88 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Bar diameter 12, 13, 15, 16, 18, 19, 20, 22mm ava, 32mm wide bracket | SPF1826-15K | 1 | | $39.61 |
Mounting, stabiliserSway Bar Mount Bush KitBar diameter 12,13,15,16,18,19,20,22mm ava,32mm wide bracket Vehicle Application Information: - Measure bar diameter, 32mm wide bracket
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Bar diameter 12, 13, 15, 16, 18, 19, 20, 22mm ava, 32mm wide bracket | SPF1826-16K | 1 | | $39.61 |
Mounting, stabiliserSway Bar Mount Bush KitBar diameter 12,13,15,16,18,19,20,22mm ava,32mm wide bracket Vehicle Application Information: - Measure bar diameter, 32mm wide bracket
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
