| Front | Bump Stop Bush Kit
| SPF2044K | 1 |  | $38.00 |
Bump StopBump Stop Bush Kit2 x Bump Stops & 2 x Caps per Kit
50mm Long x 56.3 Wide x 14-18mm Inside Diameter - Fitting Time [min.]: 120
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Kit
| SPF1600K | 2 | | $129.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitIncludes shims - Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Kit
| SPF1600SLK | 2 | | $135.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitSuper low option
Includes shims - Fitting Time [min.]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Shim Kit
| SPF1600-1.6SK | 1 | | $27.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit1.6 mm shims (10 pack) - Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Shim Kit
| SPF1600-3SK | 1 | | $43.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit3mm shims (10 pack) - Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Shim Kit
| SPF1600-6SK | 1 | | $55.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit6mm shims (10 pack) - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit
Lower position, OE strut only, raises vehicle approx. 14mm | SPF2283-10K | 1 | | $55.00 |
Spring CapCoil Spring Spacer Bush KitLower position, OE strut only, raises vehicle approx. 14mm A=101mm B=52.6mm C=10mm D=31.5mm E=70.4mm, Helical Spring Seat Vehicle Application Information: - Lower position OE strut only Raises vehicle 14mm
- Axle alignment required after fitting
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit
Lower position, OE strut only, raises vehicle approx. 28mm | SPF2283-20K | 1 | | $77.00 |
Spring CapCoil Spring Spacer Bush KitLower position, OE strut only, raises vehicle approx. 28mm A=101mm B=52.6mm C=20mm D=31.5mm E=70.4mm, Helical Spring Seat - Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Assembly Kit
Standard replacement | TRC1103 | 1 |  | $623.20 |
 Control ArmControl Arm Lower Assembly KitStandard replacement Vehicle Application Information: Left and Right Arms for Standard Replacement and Repair Upgrade Our front lower control arm kit for the Ford AU, BA & BF series has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1103 by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
| SPF1838K | 1 | | $150.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
| SPF1839K | 1 | | $83.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit- Fitting Time [min.]: 210
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Alignment Bush Kit
| KIT199K | 1 |  | $290.00 |
Suspension KitControl Arm Upper-Inner Alignment Bush KitAlignment Correction - Camber Adjustable
Suits Standard Height Vehicles Kit contains: - Front Control Arm Upper-Inner Bush Kit
- Front Camber Caster Adjusting Kit
- Axle alignment required after fitting
- Fitting Time [min.]: 270
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Alignment Bush Kit
| KIT200K | 1 | | $301.00 |
Suspension KitControl Arm Upper-Inner Alignment Bush KitAlignment Correction - Camber Adjustable
Suits Lowered Vehicles Kit contains:- Front Control Arm Upper-Inner Bush Kit
- Front Camber Caster Adjusting Kit - Super Low Option
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 270
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit
| SPF1887K | 1 | | $65.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Shock Absorber Lower Bush Kit
| SPF0299K | 1 | | $50.00 |
Bush, shock absorberShock Absorber Lower Bush KitBush located in lower control arm - Axle alignment required after fitting
- Fitting Time [min.]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Shock Absorber Upper Bush Kit
Top side only, lower side is part of spring seat | SPF1616K | 1 | | $45.00 |
Bush, shock absorberShock Absorber Upper Bush KitTop side only, lower side is part of spring seat - Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush (Power Steering)
| SPF1837K | 1 | | $29.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Sway Bar Link
LHS - Series 2 & 3 | TRC4009L | 1 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkLHS - Series 2 & 3 10mm Ball Joint Link
90 Degree opposed
Length 88mm center to center - Fitting Time [min.]: 30
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Front | Sway Bar Link
RHS - Series 2 & 3 | TRC4009R | 1 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkRHS - Series 2 & 3 10mm Ball Joint Link
90 Degree opposed
Length 88mm center to center - Fitting Time [min.]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link and Bush Kit
Standard Replacement to suit IRS Series 1 vehicles only | SPF2966BK | 1 | | $69.00 |
Sway Bar Stabiliser KitSway Bar Link and Bush KitStandard Replacement to suit IRS Series 1 vehicles only 165mm total Length, Thread Length each end 65mm Sway Bar Link and Bush Kit - Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link Bush Kit
Series 1 | SPF2950K | 1 | | |
Sway Bar Bush KitSway Bar Link Bush KitSeries 1 Vehicle Application Information: - Front & Rear Take Use Same Part
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
Series 2 & 3 | TRC1025 | 1 | | $133.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty AdjustableSeries 2 & 3 10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1615-27K | 1 | | $32.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1615-28K | 1 | | $32.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1615-30K | 1 | | $32.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Bump Stop Bush Kit
| SPF2044K | 1 | | $38.00 |
Bump StopBump Stop Bush Kit2 x Bump Stops & 2 x Caps per Kit
50mm Long x 56.3 Wide x 14-18mm Inside Diameter - Fitting Time [min.]: 120
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Coil Spring Spacer Bush Kit
| SPF0252-10K | 2 | | $28.00 |
Spring CapCoil Spring Spacer Bush KitA=140mm B=100mm C=10mm Vehicle Application Information: - Raises vehicle approximately 20mm when fitted to the front axle and 10mm when fitted to the rear axle of the vehicle.
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Part of kit: SPF0252-6K (x1)
|
| Rear | Coil Spring Spacer Bush Kit
| SPF0252-3K | 2 | | $17.00 |
Spring CapCoil Spring Spacer Bush KitA=140mm B=100mm C=3mm Vehicle Application Information: - Raises vehicle approximately 6mm when fitted to the front axle and 3mm when fitted to the rear axle of the vehicle.
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: SPF0252-6K (x1)
|
| Rear | Coil Spring Spacer Bush Kit
| SPF0252-6K | 2 | | $21.00 |
Spring CapCoil Spring Spacer Bush KitA=140mm B=100mm C=6mm
Vehicle Application Information: - Raises vehicle approximately 12mm when fitted to the front axle and 6mm when fitted to the rear axle of the vehicle.
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: SPF0252-3K (x1)
|
| Rear | Control Arm Lower-Inner Front Bush Kit
IRS vehicles only | SPF3598K | 1 | | $107.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush KitIRS vehicles only - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Rear Bush Kit
IRS vehicles only | SPF3599K | 1 | | $111.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitIRS vehicles only - Fitting Position: Rear
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Control Arm Lower-Outer Bush Kit
IRS Vehicles Only, Bushing located in Arm | SPF3234K | 1 | | $128.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Outer Bush KitIRS Vehicles Only, Bushing located in Arm Replacement Hyme joint
46.9mm housing - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 90
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Front Bush Kit
IRS VEHICLES ONLY | SPF3635K | 1 | | $134.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Front Bush KitIRS VEHICLES ONLY - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 240
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit
IRS Vehicles Only, Bushing located in arm | SPF3233AK | 1 | | $129.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush KitIRS Vehicles Only, Bushing located in arm Replacement Hyme Joint
40mm housing - Fitting Time [min.]: 90
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Differential Mount Bush Kit
IRS Suspension | SPF5073K | 1 | | $300.00 |
Bush, differential mountDifferential Mount Bush KitIRS Suspension - Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Rear End Repair Kit
| KIT062RK | 1 | | $265.00 |
Suspension KitRear End Repair KitKit contains: - Rear Sway Bar Link Bush Kit
- Rear Trailing Arm Lower-Front Bush Kit
- Rear Trailing Arm Upper Bush Kit
- Rear Watts Link Bush Kit
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 300
- Part of kit: (x)
|
| Rear | Shock Absorber Upper Bush Kit
Solid axle | SPF0204K | 1 | | $37.00 |
Bush, shock absorberShock Absorber Upper Bush KitSolid axle Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Shock Absorber Upper Bush Kit
IRS vehicles Only | SPF5305K | 1 | | $72.00 |
Bush, shock absorberShock Absorber Upper Bush KitIRS vehicles Only - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Subframe Mount Kit - Front Position
IRS Suspension | SPF5047K | 1 | | $134.00 |
Bush, sub-frameSubframe Mount Kit - Front PositionIRS Suspension - Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Subframe Mount Kit - Rear Position
IRS Suspension | SPF5046K | 1 | | $350.00 |
Bush, sub-frameSubframe Mount Kit - Rear PositionIRS Suspension - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Time [min.]: 30
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Sway Bar Link
Standard Replacement to suit IRS vehicles only | TRC4006 | 2 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement to suit IRS vehicles only 10mm Ball Joint Link
60mm center to center - Fitting Difficulty: easy
- Fitting Time [min.]: 30
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
Solid axle | SPF2950K | 1 | | |
Sway Bar Bush KitSway Bar Link Bush KitSolid axle Vehicle Application Information: - Front & Rear Take Use Same Part
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1615-27K | 1 | | $32.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1615-28K | 1 | | $32.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1615-30K | 1 | | $32.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner Bush Kit
| SPF2749K | 1 | | $106.00 |
Bush, control arm mountingToe Control Arm Inner Bush KitVehicle Application Information: - IRS Rear Suspension Remove original shell for fitment of bushing.
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front Bush Kit
Solid axle | SPF0875K | 1 | | $92.00 |
Control Arm-/Trailing Arm BushTrailing Arm Lower-Front Bush KitSolid axle Vehicle Application Information: - 4.0L Engine EB Falcon / NC Fairlane & on
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Rear Bush Kit
Solid axle | SPF0623-80K | 1 | | $112.00 |
Control Arm-/Trailing Arm BushTrailing Arm Lower-Rear Bush KitSolid axle Vehicle Application Information: - 4.0L Engine EB Falcon / NC Fairlane & on
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Rear Bush Kit
Solid axle "Sports use only" | SPF0623-90K | 1 | | $117.00 |
Control Arm-/Trailing Arm BushTrailing Arm Lower-Rear Bush KitSolid axle "Sports use only" Vehicle Application Information: - 4.0L & V8 Sports use onlyEB Falcon/NC Fairlane & on
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Trailing Arm Upper Bush Kit
Solid axle | SPF0874-90K | 1 | | $134.00 |
Control Arm-/Trailing Arm BushTrailing Arm Upper Bush KitSolid axle Vehicle Application Information: - Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm Upper Bush Kit
Solid axle | SPF0874K | 1 | | $119.00 |
Control Arm-/Trailing Arm BushTrailing Arm Upper Bush KitSolid axle - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Rear | Watts Link Bush Kit
Solid axle | SPF0156K | 1 | | $65.00 |
Bush, watts linkWatts Link Bush KitSolid axle Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 120
- Part of kit: (x)
|
