Front | Control Arm Lower Inner Rear Bush & Bracket Kit
| SPF4952K | 1 | | $258.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush & Bracket KitVehicle Application Information: - to suit vehicles up to 03/2008
Standard Replacement for Repair and Repair Upgrade SuperPro has now made it really easy and affordable to repair and upgrade a huge range of VAG vehicles. - The brackets and bushes are supplied together in one easy to install package, making this repair upgrade a no brainer!
- The negative effects for handling and braking that come from voided, soft or worn rubber bushes are eliminated with the new SuperPro Bracket and Bushing kit.
Now everyone can enjoy the feeling of positive arm location that SuperPro brings when replacing the OE rubber bushes.
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing will be replaced at the same time. Vehicle Application Information: - to suit vehicles with horizontally mounted Control Arm Bush into bracket
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF2082K | 1 | | $101.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitVehicle Application Information: - to suit press metal arm
- to suit vehicles from 04/2008 on
Vehicle Application Information: - Fitting time [min]: 210
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 210
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF2084K | 1 | | $110.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetVehicle Application Information: - to suit press metal arm
- to suit vehicles from 04/2008 on
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 210
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit from 04/08 | SPF1915K | 1 | | $60.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kitfrom 04/08 Bush OD 30mm
Tube 19x12.3x54 - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit up to 03/08 | SPF3311K | 1 | | $139.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kitup to 03/08 - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit Sports use only, replaces lower rear bushing in dogbone mount | SPF2907-70K | 1 | | $130.00 |
Mounting, engineEngine Steady Mount Bush KitSports use only, replaces lower rear bushing in dogbone mount - Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit Competition Use | SPF2907-80K | 1 | | $133.00 |
Mounting, engineEngine Steady Mount Bush KitCompetition Use - Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Beam Axle Pivot Bush Kit
| SPF2481K | 1 | | $271.00 |
Bush, beam axleBeam Axle Pivot Bush KitRemove original outer shell for fitment Vehicle Application Information: - Fitting time [min]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|