Tap to Search Parts or Vehicles

SuperPro Control Arm Bush Kit for
HOLDEN CAPTIVA 7 2006-2018 - CG 135 FWD Diesel 03/11-12/18

Part Information




Control Arm-/Trailing Arm Bush

SuperPro Control Arm Bush Kit

Vehicle Application Information:

  • 0.5 Degree Caster Adjustment available
These bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.

SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time.

Vehicle Application Information:

  • Steering Pull Correction Kit
  • Axle alignment required after fitting
  • Fitting Difficulty: difficult
  • Fitting Position: Front
  • Fitting Time [min.]: 180