Front | Positive Shift Mount
| SPF5061K | 1 | | $46.00 |
Bushing, transmission mountingPositive Shift MountInserts into heavily voided factory transmission mount and delivers improved shift feel by eliminating excessive movement in the driveline - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Bar to Chassis Bush Kit - Caster Adjustable
| SPF4737K | 1 | | $430.00 |
Mounting Kit, control/trailing arm mountingStrut Bar to Chassis Bush Kit - Caster AdjustableUpgraded bush kit is on-car caster adjustable SuperPro Suspension bush kits are full suspension upgrade kits, designed to improve the handling and suspension response from your vehicle.
Features: All SuperPro bushings made with premium proprietary polyurethane Reduced abrasion, temperature resistance and harshness Lifetime guarantee Custom engineered in Australia
Engineered from proprietary polyurethane, SuperPro Bushes are manufactured to be superior in every way. The Polyurethane gives the best of both the worlds of rubber and plastic, delivering better resistance to abrasion, increased memory properties, and increased forgiveness to temperature changes and the introduction of temperature, oils and coolant. This means you get superior control of noise, harshness and vibration. SuperPro Suspension Bush Kits come with some of the best products to truly add another layer of stability to your suspension system, including control arm bushes, trailing arm bushes and shock absorber bushes. - Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12160 | 1 | | $226.00 |
Link/Coupling Rod, stabiliser barSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 210 mm - Maximum Length 260 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Alloy Integral Link - Heavy Duty
| SPF4742K | 1 | | $527.00 |
Link/Coupling Rod, stabiliser barAlloy Integral Link - Heavy Duty HD integral link eliminates deflection of the OE piece minimizing wheel hop & axle wrap - Fitting Position: Rear
- Fitting time [min]: 30
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Differential Mount Bush Kit
| TRC4758 | 1 | | $625.00 |
Mounting, differentialDifferential Mount Bush KitSuperPro Hybrid material provides accurate location and minimal deflection with no increase in NVH over the OEM component - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 360
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Exchange Subframe with SuperPro Hybrid Mount Bushes
| TRC5500XSF | 1 | | $1963.00 |
Holder, support frame/subframeExchange Subframe with SuperPro Hybrid Mount Bushesprovides positive differential & subframe location to mitigate wheel hop under acceleration while retaining OE levels of NVH - restricted to the Australian market
Vehicle Application Information: - Exchange Sub Frame (Deposit Fee will be charged)
- Fitting Difficulty: difficult
- Fitting time [min]: 300
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Lateral Camber Link Inner Bush Kit
| SPF4741K | 1 | | $120.00 |
Mounting Kit, control/trailing arm mountingLateral Camber Link Inner Bush KitUpgraded material and design provides more consistent contact patch - Fitting Difficulty: difficult
- Fitting time [min]: 90
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Lateral Camber Link Outer Bush Kit
| SPF4740K | 1 | | $224.00 |
Mounting Kit, control/trailing arm mountingLateral Camber Link Outer Bush KitUpgraded material and design provides more consistent contact patch - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 90
- Part of kit: (x)
|
Rear | Lower Control Arm Inner Forward Bush Kit
| SPF4736K | 1 | | $209.00 |
Mounting Kit, control/trailing arm mountingLower Control Arm Inner Forward Bush KitMinimizes toe change under load, aids grip and traction - Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Subframe Mount Void Filler Bush Kit
| SPF5146K | 1 | | $92.00 |
Mounting, differentialSubframe Mount Void Filler Bush KitVehicle Application Information: - void fillers to suit OEM bushes only
- Fitting time [min]: 90
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Subframe to Chassis Mount Bush Kit
| TRC4767 | 1 | | $761.00 |
Mounting, differentialSubframe to Chassis Mount Bush KitSuperPro Hybrid Subframe Mount Set provides positive subframe location to mitigate wheel hop under acceleration while retaining OE levels of NVH - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1245 | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Sway Bar Mount Bracket & Bush Kit
| SPF4766-26K | 1 | | $235.00 |
Mounting, stabiliser barSway Bar Mount Bracket & Bush Kit
available sizes 26 & 31mm Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 90
- Part of kit: (x)
|
Rear | Sway Bar Mount Bracket & Bush Kit
| SPF4766-31K | 1 | | $261.00 |
Mounting, stabiliser barSway Bar Mount Bracket & Bush Kit
available sizes 26 & 31mm Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting time [min]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Traction Kit
| TRC5500 | 1 | | $1252.00 |
Mounting, differentialTraction KitSuperPro Hybrid Mount Set provides positive differential & subframe location to mitigate wheel hop under acceleration while retaining OE levels of NVH - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 420
- Axle alignment required after fitting
- Part of kit: (x)
|