Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 | | $53.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Front Bush Kit
| SPF1126K | 1 | | $92.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bracket Mount Bush Kit
| SPF2451K | 1 | | $56.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bracket Mount Bush KitBracket Mount to Chassis - Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit
| SPF1112K | 1 | | $198.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitVehicle Application Information: Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit
| SPF1240K | 1 | | $214.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitVehicle Application Information: Vehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit - Single Offset
| SPF1113K | 1 | | $223.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Single OffsetVehicle Application Information: Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Slide on mount peg
- Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit - Single Offset
| SPF1241K | 1 | | $373.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Single OffsetVehicle Application Information: Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Locking nut on mount peg
- Steering Pull Correction Kit
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4016 | 2 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm parallel Ball Joint Link
Length 63mm center to center Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12160 | 1 | | $226.00 |
Link/Coupling Rod, stabiliser barSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 210 mm - Maximum Length 260 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Sway Bar Link To Chassis Bush Kit
| SPF2092B-4K | 1 | | $20.00 |
Mounting, stabiliser barSway Bar Link To Chassis Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1257-20K | 1 | | $64.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 20, 21, 22, 23 & 24mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1257-21K | 1 | | $64.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 20, 21, 22, 23 & 24mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Panhard Rod To Chassis Mount Bush Kit
| SPF0427K | 2 | | $43.00 |
Bush, panhard rodPanhard Rod To Chassis Mount Bush KitVehicle Application Information: - cotton reel type bush, OD 32mm, ID 12mm
- 28mm wide bracket
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Trailing Arm Lower-Front Bush Kit
| SPF1345K | 1 | | $243.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Front Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 150
- Part of kit: (x)
|