| Front | Control Arm Lower Front Bush Kit
| SPF4175K | 1 |  | $102.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush Kit- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Front Bush Kit - Performance Upgrade
| SPF5552K | 1 | | $286.18 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush Kit - Performance UpgradeThis kit provides additional adjustment to camber or caster depending on driver’s requirement to achieve the desired wheel alignment settings. Vehicle Application Information: - alignment correction
- when paired with a standard hole centre rear bush, this kit can provide a maximum of -0.5 degree camber or +0.5 degree caster.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit
| SPF4176K | 1 | | $201.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitSuits vehicles with vertically mounted lower Control Arm Bush Vehicle Application Information: - to suit Steel Subframe
- standard replacement
- 64.4mm OD
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit
| SPF5592K | 1 | | $293.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitSuits vehicles with vertically mounted lower Control Arm Bush Vehicle Application Information: - to suit Alloy Subframe
- standard replacement
- 64.4mm OD
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF4178K | 1 | | $201.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetSuits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!Vehicle Application Information: - to suit Steel Subframe
- alignment correction
- 64.4mm OD
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF5594K | 1 | | $301.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetSuits vehicles with vertically mounted lower Control Arm Bush Vehicle Application Information: - to suit Alloy Subframe
- alignment correction
- 64.4mm OD
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit - Single Offset
| SPF4177K | 1 | | $201.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Single OffsetVehicle Application Information: - 1 degree caster adjustment available
Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.Vehicle Application Information: - to suit Steel Subframe
- alignment correction
- 64.4mm OD
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit - Single Offset
| SPF5593K | 1 | | $301.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Single OffsetSuits vehicles with vertically mounted lower Control Arm Bush Vehicle Application Information: - to suit Alloy Subframe
- alignment correction
- 64.4mm OD
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Strut Mounts - Offset with Extra Camber
| TRC5000 | 1 |  | $473.00 |
Suspension Strut MountingStrut Mounts - Offset with Extra Camber1 Degree Extra Camber built into the top mount - Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4048 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 12mm Ball Joint Link
90 Degree opposed
Length 334mm center to center Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit
| TRC4300 | 1 | | $211.00 |
Link/Coupling Rod, stabiliser barSway Bar Link KitVehicle Application Information: - Heavy Duty, High Articulation Sway Bar Links
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting time [min]: 60
- Axle alignment required after fitting
- Part of kit: (x)
|
