Front | Control Arm Lower Front Bush Kit
| SPF1390K | 1 | | $105.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush KitVehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit Standard replacement | SPF1387K | 1 | | $226.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitStandard replacement Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset Alignment Correction | SPF1388K | 1 | | $283.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms. Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Alloy Bracket Mount Kit
| ALOY1388-90AK | 1 | | $332.00 |
Mounting, control/trailing armControl Arm Lower-Rear Alloy Bracket Mount KitMotorsport Only. Special Harder Duro. Anti Lift & Caster increase. Vehicle Application Information: - Anti Lift & Caster Increase
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Alloy Bracket Mount Kit
| ALOY1388AK | 1 | | $307.00 |
Mounting, control/trailing armControl Arm Lower-Rear Alloy Bracket Mount KitControl Lower Arm Rear Mount A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Anti Lift & Caster Increase
- alignment correction
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF1835K | 1 | | $52.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - 25mm Bracket width passenger side
- Fitting Position: Front
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF1972K | 1 | | $46.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - 30mm bracket width passenger side
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF1200K | 1 | | $87.00 |
Mounting, stabiliser barSway Bar Link Bush KitVehicle Application Information: - to suit O.E Strut eye size only
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Rod Kit HD Aluminium links, including SuperPro bushings Not suited to STi | TRC2924 | 1 | | $224.00 |
Link/Coupling Rod, stabiliser barSway Bar Link Rod KitHD Aluminium links, including SuperPro bushings Not suited to STi HD Aluminium links to suit vehicles with alloy arms. Kit includes SuperPro bushings. Vehicle Application Information: - HD Aluminium links & Bushings
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Link Bush Kit Bush OD 26mm | SPF1200AK | 1 | | $86.00 |
Mounting, stabiliser barSway Bar Link Bush KitBush OD 26mm Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 120
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Link Rod Kit
| TRC2925 | 1 | | $229.00 |
Link/Coupling Rod, stabiliser barSway Bar Link Rod KitHD Aluminium links, including SuperPro bushings Vehicle Application Information: - HD Aluminium links & Bushings
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit measure bar diameter 16, 17, 18, 19, 20, 21, 22, 26mm available | SPF0362-22K | 1 | | $65.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitmeasure bar diameter 16, 17, 18, 19, 20, 21, 22, 26mm available - Fitting time [min]: 45
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|