The Ford SuperPro Polyelast Hybrid Differential support bushings are the culmination of a year of Research, Development and rigorous testing that have exceeded all expectations in both durability rig tests and in-car trials. In rig testing the bushings have been subjected to almost twice the peak loads experienced by these bushing in the vehicle for 200000 cycles and at the conclusion of the test have exhibited no signs of degradation or wear. In the test vehicles the results have proven that these bushings perform better than even the highest expectations, absolutely silent!
Developing the right material was only part of the solution; some innovative thinking was required to overcome all the issues.This gave rise to Polyelast Hybrid. This technology uses the advanced Polyelast material in combination with SuperPro Polyurethane. Polyelast offers a high degree of isolation and the SuperPro Polyurethane acts as a progressive stopper. This provides progressive isolation and protection of the Polyelast, resulting in outstanding durability.
Insulating the Polyurethane and Polyelast material from the heat transfer was achieved by utilising a lightweight Aluminium sleeve with a composite thermal protection layer was critical in solving the durability issues.
At last there is a solution that incorporates all the best properties of the SuperPro and the original equipment bushing, rolls it into one bush that solves everything and will do so, forever!
Available Now for the following vehicle models:
- Ford Falcon BF Sedan (2002-2007)
- Ford Falcon FG Sedan (2008+)
- Ford Fairlane BF Sedan (2002-2007)
- Ford Territory SX - SY (2004-2011)
- Ford Territory SZ AWD (05-2011+)
- Ford Territory SZ RWD (05-2011+)
SPF3148PK
Rear Differential Pinion Bracket Mount Kit - Polyelast Hybrid
|
SPF3232PK
Rear Differential Centre Rear Support Kit - Polyelast Hybrid
|
KIT210K
Rear Differential Support Kit - Polyelast Hybrid
|
More information on Polyelast can be found at www.polyelast.com.au